TURNKEY SERVICE · SOUTHERN FINLAND
Elevator floor mat renewal
A worn or torn elevator floor mat shows immediately, collects dirt and can be a safety risk. We renew floor mats on a turnkey basis: measurement, removal of the old covering, installation of the new material and responsible recycling of the old one.
CALCULATE PRICE ESTIMATE →
When is it worth renewing the floor mat?
An elevator floor is under constant wear, and the mat is often the first part to look worn. Renewal is worthwhile when:
- the floor mat is worn, cracked or detached at the edges
- dirt has built up that can no longer be cleaned off
- the floor feels slippery or uneven
- the elevator's look needs updating, for example alongside other modernisation
A worn mat can be a safety risk
An elevator floor mat is not just a question of looks. A badly damaged mat — for example one that has curled up at the edges — can cause a trip or damage the elevator's door mechanism. If the damage poses an immediate danger to users, the elevator must be taken out of use until the mat has been repaired or removed.
What does floor mat renewal include?
- renewal of the agreed floor material
- removal of the old floor covering, plus haulage away and responsible recycling
- all new materials and their installation with the best fastening method and adhesive
- the necessary lift work permits — no separate person is needed to stop the elevator
A good elevator floor is hard-wearing, easy to clean, safe, good-looking and a fit for the overall design.
How the work proceeds
Enter the elevator car's width and depth into the calculator — you get an indicative price estimate instantly.
Send a quote request with the form. Attach a photo of the elevator to get your quote faster.
We confirm the quote, usually within the same business day.
We agree on an installation time.
Installation: removal of the old covering, levelling of the floor if needed, installation of the new mat with adhesive.
The old material is hauled away and recycled responsibly.
Completed floor renewals
Renewing the elevator floor is the fastest way to refresh the whole cabin. Below are examples of our floor renewals.
Worn plywood floor → dark stone-pattern mat
BEFORE
AFTEROld worn floor → seamless dark surface
BEFORE
AFTER
Aluminium chequer plate floor
For heavy use — for example goods elevators — we also install aluminium chequer plate floors that withstand even the heaviest wear.
Large elevator — seamless stone-pattern surface
Floors of large elevators are no problem either — in this project a large elevator got a seamless stone-pattern surface.
Frequently asked questions
How much does elevator floor mat renewal cost?
The price is determined by the floor area of the elevator car. You get an indicative estimate from the calculator below. The final price is confirmed in the quote. Travel costs of €1/km based on the site location are added (for trips over 1 h, €55/h).
What material is installed?
The price calculator is based on the high-quality norament 926 arago rubber flooring (colour 5171, manufactured by nora/Interface, Germany). It is a homogeneous rubber floor covering that withstands very heavy wear, is slip-resistant even when wet, dampens footstep noise and is easy to keep clean. The material is free of PVC, phthalates and halogens.
On request we also install other colours and patterns from the nora norament range as well as aluminium and steel floors. Mention your wishes in the additional details of the quote request.
How long is the elevator out of use?
The work is usually completed within one working day, often faster. The elevator is back in use as soon as the adhesive and silicone have dried. In special cases (e.g. residents with reduced mobility or elderly residents) the elevator can, by prior arrangement, be taken briefly into use during the work. We do not recommend this, as it interrupts the work and delays completion.
Is a separate person needed to stop the elevator?
No. We hold the necessary lift work permits, so we handle stopping the elevator ourselves — the housing company does not need to arrange a separate supervisor.
What if the plywood under the floor comes loose?
In newer elevators there is often plywood under the floor, which may partly come loose when the old covering is removed. In that case the floor is levelled before the new material is installed. Levelling €55/h + any material costs.
Which area do you serve?
We operate in the Helsinki metropolitan area and elsewhere in Southern Finland.
Can you renew the floors of several elevators at once?
Yes. State the number of elevators in the notes of your quote request, and we will prepare a quote for the whole property.
Price calculator
Calculate a price estimate based on your elevator car's dimensions and request a quote with the same form.
1. Elevator car dimensions
Included in the quote
- Renewal of the agreed floor material
- Removal of the old floor covering
- Haulage away and responsible recycling of the old material
- All new materials and their installation with the best fastening method and adhesive
- Hissi-Design Oy holds the necessary lift work permits
- No separate person is needed to stop the elevator
+ Travel costs €1/km (based on site location).
2. Contact details & quote request
✓ Quote request sent!
Thank you for contacting us. We will get back to you as soon as possible, usually within the same business day.
Hissi-Design Finland Oy — info@hissidesign.fi